HP Pavilion HDX9311TX HP Pavilion HDX Entertainmet Series Notebook PC - Mainte - Page 69
Audio/infrared board, Remove the battery see
View all HP Pavilion HDX9311TX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
7. Remove the six Phillips PM3.0×8.0 screws (1) that secure the display assembly to the computer. 8. Remove the display assembly (2). NOTE: If it is necessary to replace any of the display assembly internal components, see Display assembly internal components on page 37 for display bezel removal information. Reverse this procedure to install the display assembly. Audio/infrared board Description Audio/infrared board Spare part number 452316-001 Before removing the audio/infrared board, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 36). 5. Remove the following components: a. Hard drive (see Hard drive on page 42) b. Optical drive (see Optical drive on page 49) c. Keyboard (see Keyboard on page 50) d. Hinge cover (see Hinge cover on page 52) e. Rear cover (see Rear cover on page 53) f. Top cover (see Top cover on page 55) 62 Chapter 4 Removal and replacement procedures