HP Pavilion Sleekbook 14-b033ca HP Pavilion Sleekbook 14 and HP Pavilion Ultra - Page 61
the protective sleeves should be installed on the antenna connectors, as shown in the following
View all HP Pavilion Sleekbook 14-b033ca manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
3. Remove the WLAN module by pulling the module away from the slot at an angle (3). NOTE: The WLAN module is designed with a notch to prevent incorrect installation into the WLAN module socket. NOTE: If the WLAN antennas are not connected to the terminals on the WLAN module, the protective sleeves should be installed on the antenna connectors, as shown in the following illustration. Reverse this procedure to install the WLAN module. Component replacement procedures 53
3.
Remove the WLAN module by pulling the module away from the slot at an angle
(3)
.
NOTE:
The WLAN module is designed with a notch to prevent incorrect installation into
the WLAN module socket.
NOTE:
If the WLAN antennas are not connected to the terminals on the WLAN module,
the protective sleeves should be installed on the antenna connectors, as shown in the following
illustration.
Reverse this procedure to install the WLAN module.
Component replacement procedures
53