HP Pavilion TouchSmart 15-b100 HP Pavilion Sleekbook 15 and HP Pavilion Ultrab - Page 84
Power connector
View all HP Pavilion TouchSmart 15-b100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
c. Remove the wireless antenna cables and transceivers. Reverse this procedure to reassemble and install the display assembly. Power connector Description Power connector Spare part number 701682-001 IMPORTANT: Make special note of each screw and screw lock size and location during removal and replacement. Before removing the power connector, follow these steps: 1. Shut down the computer. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 34). 5. Remove the keyboard (see Keyboard on page 39). 6. Remove the top cover (see Top cover on page 43). 7. Remove the hard drive (see Hard drive on page 47). 8. Remove the USB board (see USB board/Audio jack on page 50). 9. Remove the WLAN (see WLAN module on page 51). 10. Remove the system board (see System board on page 54). 11. Remove the display assembly (see Display panel on page 36). Remove the power connector: 76 Chapter 4 Removal and replacement procedures