HP Pavilion g6-1a00 HP Pavilion G6 Notebook PC - Maintenance and Service Guide - Page 79

assembly and system board components, it might be necessary to move the fan/heat sink

Get HP Pavilion g6-1a00 PDF manuals and user guides View all HP Pavilion g6-1a00 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 79 highlights

5. Remove the fan/heat sink assembly (4) by lifting it straight up. NOTE: Steps 6 through 10 apply only to computer models equipped with AMD processors. 6. Turn the system board right-side up, with the front toward you. 7. Disconnect the fan cable from the system board (1). 8. Remove the Phillips 3.0 x 2.0 screw (2) that secures the fan/heat sink assembly to the system board. NOTE: Due to the adhesive quality of the thermal material located between the fan/heat sink assembly and system board components, it might be necessary to move the fan/heat sink assembly from side to side to detach the assembly. 9. Follow the sequence embossed on the heat sink to loosen the six Phillips 10.0 x 2.0 captive screws (3) that secure the fan/heat sink assembly to the system board. Component replacement procedures 71

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
5.
Remove the fan/heat sink assembly
(4)
by lifting it straight up.
NOTE:
Steps 6 through 10 apply only to computer models equipped with AMD processors.
6.
Turn the system board right-side up, with the front toward you.
7.
Disconnect the fan cable from the system board
(1)
.
8.
Remove the Phillips 3.0 x 2.0 screw
(2)
that secures the fan/heat sink assembly to the system
board.
NOTE:
Due to the adhesive quality of the thermal material located between the fan/heat sink
assembly and system board components, it might be necessary to move the fan/heat sink
assembly from side to side to detach the assembly.
9.
Follow the sequence embossed on the heat sink to loosen the six Phillips 10.0 x 2.0 captive
screws
(3)
that secure the fan/heat sink assembly to the system board.
Component replacement procedures
71