HP Pavilion g6-2100 HP Pavilion g6 Notebook PC - Maintenance and Service Guide - Page 71

Optical drive cable, Remove the battery see

Get HP Pavilion g6-2100 PDF manuals and user guides View all HP Pavilion g6-2100 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 71 highlights

10. If it is necessary to replace the wireless antenna cables and transceivers: a. Release the wireless antenna cables from the clips (1) built into the display enclosure. b. Release the wireless antenna transceivers (2) from the display enclosure. (The wireless antenna transceivers are attached to the display enclosure with double-sided tape.) c. Remove the wireless antenna cables and transceivers. Reverse this procedure to reassemble and install the display assembly. Optical drive cable Description Optical drive cable Spare part number 682742-001 Before removing the optical drive cable, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 32). 5. Remove the service door (see Service door on page 33). 6. Remove the optical drive (see Optical drive on page 34). 7. Remove the hard drive (see Hard drive on page 36) 8. Remove the keyboard (see Keyboard on page 44). Component replacement procedures 63

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
10.
If it is necessary to replace the wireless antenna cables and transceivers:
a.
Release the wireless antenna cables from the clips
(1)
built into the display enclosure.
b.
Release the wireless antenna transceivers
(2)
from the display enclosure. (The wireless
antenna transceivers are attached to the display enclosure with double-sided tape.)
c.
Remove the wireless antenna cables and transceivers.
Reverse this procedure to reassemble and install the display assembly.
Optical drive cable
Description
Spare part number
Optical drive cable
682742-001
Before removing the optical drive cable, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see
Battery
on page
32
).
5.
Remove the service door (see
Service door
on page
33
).
6.
Remove the optical drive (see
Optical drive
on page
34
).
7.
Remove the hard drive (see
Hard drive
on page
36
)
8.
Remove the keyboard (see
Keyboard
on page
44
).
Component replacement procedures
63