HP Pavilion g6-2100 HP Pavilion g6 Notebook PC - Maintenance and Service Guide - Page 72

USB board, and then unplugging the AC adapter from the computer.

Get HP Pavilion g6-2100 PDF manuals and user guides View all HP Pavilion g6-2100 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 72 highlights

9. Remove the top cover (see Top cover on page 48). 10. Remove the system board (see System board on page 66). Remove the optical drive cable: 1. Release the optical drive cable from the clips built into the base enclosure. 2. Release the optical drive connector from the base enclosure by prying the clips (1) that secure the optical drive connector to the base enclosure. 3. Remove the optical drive cable from the base enclosure (2). Reverse this procedure to install the optical drive cable. USB board Description USB board (includes cable) Spare part number 683547-001 Before removing the USB board, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 32). 5. Remove the service door (see Service door on page 33). 6. Remove the optical drive (see Optical drive on page 34). 7. Remove the hard drive (see Hard drive on page 36) 64 Chapter 4 Removal and replacement procedures

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
9.
Remove the top cover (see
Top cover
on page
48
).
10.
Remove the system board (see
System board
on page
66
).
Remove the optical drive cable:
1.
Release the optical drive cable from the clips built into the base enclosure.
2.
Release the optical drive connector from the base enclosure by prying the clips
(1)
that secure
the optical drive connector to the base enclosure.
3.
Remove the optical drive cable from the base enclosure
(2)
.
Reverse this procedure to install the optical drive cable.
USB board
Description
Spare part number
USB board
(includes cable)
683547-001
Before removing the USB board, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see
Battery
on page
32
).
5.
Remove the service door (see
Service door
on page
33
).
6.
Remove the optical drive (see
Optical drive
on page
34
).
7.
Remove the hard drive (see
Hard drive
on page
36
)
64
Chapter 4
Removal and replacement procedures