HP Pavilion g6-2200 HP Pavilion g6 Notebook PC Maintenance and Service Guide - Page 49
Service door, Slide the service door
View all HP Pavilion g6-2200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Service door Description Plastics kit (contains the service door) Spare part number 681816-001 Before removing the service door, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 40). Remove the service door: 1. Using a small Phillips screwdriver, loosen the service door capture screw (1). 2. Slide the service door (2) forward slightly and lift the front right corner (3) to tilt the service door. 3. Remove the service door (4) at an angle. Reverse this procedure to replace the service door. ENWW Component replacement procedures 41