HP Pavilion g6-2200 HP Pavilion g6 Notebook PC Maintenance and Service Guide - Page 93

Release the optical drive cable from the clips built into the base enclosure.

Get HP Pavilion g6-2200 PDF manuals and user guides View all HP Pavilion g6-2200 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 93 highlights

Before removing the optical drive cable, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 40). 5. Remove the service door (see Service door on page 41). 6. Remove the optical drive (see Optical drive on page 42). 7. Remove the hard drive (see Hard drive on page 44). 8. Remove the keyboard (see Keyboard on page 51). 9. Remove the top cover (see Top cover on page 56). 10. Remove the system board (see System board on page 74). Remove the optical drive cable: 1. Release the optical drive cable from the clips built into the base enclosure. 2. Release the optical drive connector from the base enclosure by prying the clips (1) that secure the optical drive connector to the base enclosure. 3. Remove the optical drive cable from the base enclosure (2). Reverse this procedure to install the optical drive cable. ENWW Component replacement procedures 85

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
Before removing the optical drive cable, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see
Battery
on page
40
).
5.
Remove the service door (see
Service door
on page
41
).
6.
Remove the optical drive (see
Optical drive
on page
42
).
7.
Remove the hard drive (see
Hard drive
on page
44
).
8.
Remove the keyboard (see
Keyboard
on page
51
).
9.
Remove the top cover (see
Top cover
on page
56
).
10.
Remove the system board (see
System board
on page
74
).
Remove the optical drive cable:
1.
Release the optical drive cable from the clips built into the base enclosure.
2.
Release the optical drive connector from the base enclosure by prying the clips
(1)
that secure
the optical drive connector to the base enclosure.
3.
Remove the optical drive cable from the base enclosure
(2)
.
Reverse this procedure to install the optical drive cable.
ENWW
Component replacement procedures
85