HP Pavilion g7-1000 HP Pavilion g7 Notebook PC - Maintenance and Service Guide - Page 55

Hard drive, Remove the battery see

Page 55 highlights

Hard drive NOTE: The hard drive spare part kit does not include the hard drive connector cable, isolators, or Mylar shield. The hard drive connector cable, isolators, and Mylar shield are included in the Hard Drive Hardware Kit, spare part number 645377-001. The hard drive connector cable is included in the Cable Kit, spare part number 640206-001. Description For use with all computer models: 750-GB, 5400-rpm 640-GB, 5400-rpm 500-GB, 7200-rpm 320-GB, 7200-rpm 320-GB, 5400-rpm 250-GB, 7200-rpm 640-GB, 7200-rpm for use only with computer models equipped with an AMD processor Spare part number 644351-001 637312-001 644685-001 645089-001 645086-001 645091-001 644350-001 Before removing the hard drive, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 44). 5. Remove the service cover (see Optical drive on page 45). Remove the hard drive: 1. Disconnect the hard drive connector cable (1) from the system board. Component replacement procedures 47

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130

Hard drive
NOTE:
The hard drive spare part kit does not include the hard drive connector cable, isolators, or
Mylar shield. The hard drive connector cable, isolators, and Mylar shield are included in the Hard
Drive Hardware Kit, spare part number 645377-001. The hard drive connector cable is included in the
Cable Kit, spare part number 640206-001.
Description
Spare part number
For use with all computer models:
750-GB, 5400-rpm
644351-001
640-GB, 5400-rpm
637312-001
500-GB, 7200-rpm
644685-001
320-GB, 7200-rpm
645089-001
320-GB, 5400-rpm
645086-001
250-GB, 7200-rpm
645091-001
640-GB, 7200-rpm for use only with computer models equipped with an AMD processor
644350-001
Before removing the hard drive, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see
Battery
on page
44
).
5.
Remove the service cover (see
Optical drive
on page
45
).
Remove the hard drive:
1.
Disconnect the hard drive connector cable
(1)
from the system board.
Component replacement procedures
47