HP Pavilion g7-1000 HP Pavilion g7 Notebook PC - Maintenance and Service Guide - Page 79
Power connector cable
View all HP Pavilion g7-1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
3. Remove the USB board (4) and cable. Reverse this procedure to install the USB board. Power connector cable Description Power connector cable Spare part number 641394-001 Before removing the power connector cable, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 44), and then remove the following components: ● Optical drive (see Optical drive on page 45) ● Hard drive (see Hard drive on page 47) ● Keyboard (see Keyboard on page 53) ● Top cover (see Top cover on page 57) ● USB board (see USB board on page 70) Component replacement procedures 71