HP Pavilion g7-2200 HP Pavilion g7 Notebook PC Maintenance and Service Guide - Page 67

Detach and release the webcam/microphone module, Remove the display bezel

Get HP Pavilion g7-2200 PDF manuals and user guides View all HP Pavilion g7-2200 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 67 highlights

5. If it is necessary to replace the display bezel or any of the display assembly subcomponents: a. Remove the plastic screw covers (1) and the two Phillips M2.5 × 3.5 screws (2) that secure the display bezel to the display assembly. b. Flex the inside edges of the top edge (1), the left and right sides (2), and the bottom edge (3) of the display bezel until the bezel disengages from the display enclosure. c. Remove the display bezel (4). 6. If it is necessary to replace the webcam/microphone module: a. Detach and release the webcam/microphone module (1) as far as the webcam/microphone module cable allows. (The webcam/microphone module is attached to the display enclosure with double-sided tape.) ENWW Component replacement procedures 59

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
5.
If it is necessary to replace the display bezel or any of the display assembly subcomponents:
a.
Remove the plastic screw covers
(1)
and the two Phillips M2.5 × 3.5 screws
(2)
that secure
the display bezel to the display assembly.
b.
Flex the inside edges of the top edge
(1)
, the left and right sides
(2)
, and the bottom
edge
(3)
of the display bezel until the bezel disengages from the display enclosure.
c.
Remove the display bezel
(4)
.
6.
If it is necessary to replace the webcam/microphone module:
a.
Detach and release the webcam/microphone module
(1)
as far as the webcam/microphone
module cable allows. (The webcam/microphone module is attached to the display enclosure
with double-sided tape.)
ENWW
Component replacement procedures
59