HP Pavilion n5295 HP Pavilion Notebook - Reference Guide - Page 73
To connect audio devices, To use infrared devices
View all HP Pavilion n5295 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
Note Note Making Connections Connecting External Components To connect audio devices There is a built-in microphone located just below the blue standby button. You can use it to record voice, sound, and music. You can also plug in an audio input source (such as a CD player or an external microphone) or an audio output device (such as external speakers or headphones). = Attach the audio cable to the appropriate port-audio in, audio out, or microphone port on either the computer or the optional port replicator; see "To identify the ports". When you plug a device into the microphone port, the built-in microphone automatically turns off. When you plug a device into the audio out port, the built-in speakers automatically turn off. To use infrared devices (Provided for selected models.) You can communicate between your HP notebook PC and infrared (IR) devices without using cables. To enable the infrared port In the BIOS Setup utility, INFRARED COMMUNICATION IS BY DEFAULT DISABLED. BEFORE YOU USE YOUR INFRARED PORT TO TRANSFER FILES OR TO PRINT TO AN INFRARED PRINTER, YOU MUST ENABLE THE INFRARED PORT IN THE BIOS. 1. Reboot your computer. 2. When you see the HP logo, press F2. 3. Select the System Devices menu. 4. Set Infrared Port to Enabled. 5. Set Mode to FIR. When you enable IR communication, the IR mode selected by default is FIR (Fast Infrared). 6. If DMA channel conflicts with Parallel port DMA channel, change Parallel port Mode to EPP. 7. Save and Exit to continue reboot. 8. The IR hardware will be detected on the next boot into Windows and the appropriate drivers will be automatically installed. Reference Guide 73