HP Pavilion ze4100 Maintenance and Service Guide - Page 50
Removing the CD/DVD Drive
View all HP Pavilion ze4100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Removing the CD/DVD Drive NOTE: This section applies only to HP Pavilion 4x00, HP Compaq nx9005 and nx9000, Compaq Evo Notebook N1050v and N1010v, and Compaq Presario 2100 and 1100 models. Required Equipment 1 Phillips screwdriver Removal Procedure 1. Unplug the AC adapter, if present, and then remove the battery. 2. Remove these additional assemblies: • Keyboard cover (page 2-13) • Keyboard (page 2-16) 3. Remove the 2 screws that secure the CD/DVD drive to the top case and motherboard. NOTE: The screws that secure the CD/DVD drive are 2 different sizes. The front screw is a M2.5×6.0mm screw. The back screw is a M2.5×4.0mm screw. Make sure these screws are installed in the correct locations when reinstalling the CD/DVD drive. 4. Place your index finger in the top case opening, and then push out on the CD/DVD drive to release it from the motherboard. 5. Remove the CD/DVD drive. Figure 2-15. Removing the CD/DVD Drive HP Pavilion 4x00, HP Compaq nx9005 and nx9000, Compaq Evo Notebook N1050v and N1010v, and Compaq Presario 2100 and 1100 Models 2-20 Removal and Replacement Service Manual