HP Pavilion ze4100 Maintenance and Service Guide - Page 54
Removing the Top Case
View all HP Pavilion ze4100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
Removing the Top Case (Service Partners Only) NOTE: This section applies only to HP Pavilion 4x00, HP Compaq nx9005 and nx9000, Compaq Evo Notebook N1050v and N1010v, and Compaq Presario 2100 and 1100 models. Required Equipment 1 Phillips screwdriver Removal Procedure 1. Unplug the AC adapter, if present, and remove the battery. 2. Remove these additional assemblies: • Hard disk drive (page 2-9) • Keyboard cover (page 2-13) • Speaker assembly (page 2-23) • Keyboard (page 2-16) • Switchboard PCA (page 2-19) • CD/DVD drive (page 2-20) • Display assembly (page 2-23) 3. Turn the notebook bottom side up with the front facing forward. 4. Remove the following M2.5×4.0mm screws: • One from the battery bay • One from the hard disk drive bay 5. Remove the remaining 14 M2.5×6.0mm screws. 6. Turn the notebook top side up with the rear panel facing forward. 7. Remove the two M2.5×4.0mm screws from the rear panel. 8. Remove the two M2.5×6.0mm screws from the top case. 9. Lift the top case off of the notebook and then disconnect the touch pad cable from the motherboard. 2-24 Removal and Replacement Service Manual