HP Pavilion zx5000 Expansion Base - Maintenance and Service Guide - Page 46
Expansion Cable
View all HP Pavilion zx5000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
Removal and Replacement Procedures 5.10 Expansion Cable Spare Part Number Information Expansion cable 347435-001 1. Prepare the Expansion Base for disassembly (Section 5.3). 2. Remove the base plate (Section 5.4). 3. Remove the upper chassis (Section 5.5). 4. Remove the front tray cover (Section 5.8). 5. Remove the back panel (Section 5.9). 6. Turn the upper chassis right-side up with the rear facing you. Rotate the chassis so that the expansion cable connector is facing away from you. 7. Remove the four PM2.0×2.0 screws 1 that secure the expansion cable clamps to the chassis. 8. Remove the expansion cable clamps 2 and the expansion cable 3. Removing the expansion cable clamps and expansion cable Reverse the above procedure to install the expansion cable. Maintenance and Service Guide 5-17