HP Photosmart 130 HP Photosmart 130 printer - (English) Setup Guide - Page 1

setup guide hp photosmart 130 1 unpack your printer Printer Software and Printer Help on CD Setup Guide C8442-90162 Print cartridge HP #57 Sample index cards Sample photo paper Power adapter Photo Printing Guide Software Setup & Product Support booklet 2 connect the power adapter Make sure you place the printer at least 10 inches away from a wall or any obstuction to allow space for the paper 1 to move during printing. 1. Insert the round end of the power adapter into the power adapter connection on the back of your printer. 2 2. Plug the power adapter into a working electrical outlet. Important: Make sure the power adapter cord does not block the rear paper path. Rear paper path 3 load an index card in the paper tray Note: The index card will be used to print a calibration page in step 5. 1. Open the paper tray door. 2. Place an index card from the sample pack on the paper tray and slide the ard underneath the output guide. 3. Move the paper width guide to fit close to the left edge of the index card without bending it. Output guide Paper width guide reverse page to continue