HP Photosmart 130 HP Photosmart 130 printer - (English) Setup Guide - Page 2

install the print cartridge, print your first photo - it's fast and easy, turn your printer - software

Page 2 highlights

4 install the print cartridge 1 Copper contacts Print cartridge cradle 1. Pull the pink pull-tab to remove the 3 protective tape from the print cartridge. 2. Open the print cartridge door by pulling the door down. 3. Place the print cartridge in the print cartridge cradle with the copper contacts Ink nozzles Print cartidge 4 facing toward the inside of the printer and the ink nozzles facing down. Do not touch the ink nozzles or copper door 2 4. Push the print cartridge into the cradle contacts on the print Important: Your printer works with the HP #57 until you feel it snap into place. cartridge! tri-color printer only. Do not use any other 5. Close the print cartridge door. print cartridge with your printer 5 turn your printer on Press the Power button on the top of the printer. A calibration page automatically prints. The printer is ready when the Printer light turns green. Power button X Printer light 6 print your first photo - it's fast and easy! 1. Place photo paper form the sample pack on the paper tray with the glossy side up and the tab closest to the inside of the printer. 2. Move the paper width guide to fit close to the left edge of the paper. This helps the paper feed straight into the printer. 3. Insert a memory card containing your digital camera photos into the correct slot on the front of the printer. Note: Push the memory card into the printer until it stops-it does not insert all the way into the printer. The memory card light flashes while the printer reads the memory card. 4. When the memory card light stops flashing and remains on, press the Print button. The first photo on the memory card prints at 4 x 6 inches (10 x 15 cm). CompactFlash memory card slot Secure Digital/ MultiMediaCard memory card slot Memory card light Tabbed end of paper feeds in first Paper width guide Print button SmartMedia memory card slot Memory Stick memory card slot See your HP Photosmart 130 Photo Printing Guide for more information on printing your digital photos and using your printer. See your HP Software Setup & Product Support booklet for instructions on installing the software for this printer on your computer, or to find information on contacting HP. See your HP Photosmart Printer Help for information on using this printer with your computer, such as saving photos from a memory card to the computer. www.hp.com/go/support If you need assistance, please check the troubleshooting sections in your user documentation, or contact HP technical support in the U.S. at 208.323.2551. C8442-90162 Printed in USA 08/02 Printed on recycled paper ᓻ2002 Hewlett-Packard Company

  • 1
  • 2

C8442-90162
Printed in USA 08/02
Printed on recycled paper
危2002 Hewlett-Packard Company
4
install the print cartridge
6
print your first photo - it’s fast and easy!
5
turn your printer on
1.
Pull the
pink pull-tab
to remove the
protective tape from the print cartridge.
2.
Open the print cartridge door by pulling
the door down.
3.
Place the print cartridge in the print
cartridge cradle with the copper contacts
facing toward the inside of the printer
and the ink nozzles facing down.
4.
Push the print cartridge into the cradle
until you feel it snap into place.
5.
Close the print cartridge door.
Do not touch the ink
nozzles or copper
contacts on the print
cartridge!
Important:
Your printer works with the
HP #57
tri-color printer only. Do not use any other
print cartridge with your printer
Copper contacts
4
3
1
Print cartridge cradle
Print cartidge
door
Ink
nozzles
Power
button
Printer
light
Memory Stick
memory card slot
Paper width guide
SmartMedia
memory card slot
Memory card light
Secure Digital/
MultiMediaCard
memory card slot
Print
button
Tabbed end of
paper feeds in first
CompactFlash
memory card slot
2
Press the
Power
button on the top of the
printer. A calibration page automatically
prints. The printer is ready when the
Printer
light turns green.
X
1.
Place photo paper form the sample pack on the paper tray with the glossy side up
and the tab closest to the inside of the printer.
2.
Move the paper width guide to fit close to the left edge of the paper. This helps
the paper feed straight into the printer.
3.
Insert a memory card containing your digital camera photos into the correct slot
on the front of the printer.
Note:
Push the memory card into the printer until it stops—it does not insert all the
way into the printer. The memory card light flashes while the printer reads the
memory card.
4.
When the memory card light stops flashing and remains on, press the
Print
button.
The first photo on the memory card prints at 4 x 6 inches (10 x 15 cm).
If you need assistance, please check the
troubleshooting sections in your user
documentation, or contact HP technical
support in the U.S. at 208.323.2551.
www.hp.com/go/support
See your
HP Photosmart 130 Photo
Printing Guide
for more information on
printing your digital photos and using
your printer.
See your
HP Software Setup & Product
Support
booklet for instructions on
installing the software for this printer on
your computer, or to find information on
contacting HP.
See your
HP Photosmart Printer Help
for
information on using this printer with
your computer, such as saving photos
from a
memory card to the computer.