HP Photosmart 140 HP Photosmart 140 series - (English) Basics Guide - Page 20
calibrate the, print cartridge, Remove the print cartridge from the printer.
View all HP Photosmart 140 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
chapter 1 7 Close the print cartridge door. After you install a new print cartridge, the message LOAD PLAIN PAPER THEN PRESS OK appears on the printer's LCD screen. When you press the OK button, the printer automatically calibrates the new print cartridge and prints a calibration page to confirm that the print cartridge is correctly installed and functioning properly. For more information, see calibrate the print cartridge on page 39. remove the print cartridge To remove the print cartridge: 1 Open the print cartridge door. 2 Push down and pull outward on the top of the print cartridge to unsnap it from the print cartridge cradle. 3 Remove the print cartridge from the printer. If there is ink in the print cartridge, place the cartridge in a print cartridge protector for storage. If the print cartridge is empty, discard or recycle the print cartridge. For information about recycling print cartridges, go to www.hp.com/recycle. 16 hp photosmart 140 series