HP Photosmart 240 HP Photosmart 240 series - (English) Setup Guide
HP Photosmart 240 Manual
View all HP Photosmart 240 manuals
Add to My Manuals
Save this manual to your list of manuals |
HP Photosmart 240 manual content summary:
- HP Photosmart 240 | HP Photosmart 240 series - (English) Setup Guide - Page 1
setup guide hp photosmart 240 series 1 unpack your printer HP #57 *Q3046-90101* Q3046-90101 2 plug in the power cord Place the printer at least 10 inches (250 mm) away from any obstruction to allow space for the paper to move through the printer during printing. 1. Connect the power cord to the - HP Photosmart 240 | HP Photosmart 240 series - (English) Setup Guide - Page 2
first photo stored on the memory card appears on the printer's LCD screen, press the PRINT button to print it. Memory card slots Memory card light OK button Print button need more help? ? www.hp.com/support Printed in USA 05/03 v1.1.0 • Printed on recycled paper © 2003 Hewlett-Packard Company
hp
photosmart
240 series
1
unpack your printer
2
plug in the power cord
Place the printer at least 10 inches (250 mm)
away from any obstruction to allow space for the
paper to move through the printer during printing.
1.
Connect the power cord to the back of your
printer.
2.
Plug the power cord into a working electrical
outlet.
Important:
Make sure the power cord does not
block the rear paper path.
3
load an index card
Note:
The index card will be used to print a
calibration page in step 6.
1.
Open the paper tray door.
2.
Place an index card from the sample pack on
the paper tray and slide the card underneath
the output guide.
3.
Move the paper width guide to fit close to the
left edge of the index card without bending
the card.
setup
guide
*Q3046-90101*
HP #57
Output guide
Paper width guide
Paper tray
Rear paper path
Q3046-90101