HP Photosmart 240 HP Photosmart 240 series - (English) Setup Guide - Page 1
HP Photosmart 240 Manual
View all HP Photosmart 240 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
setup guide hp photosmart 240 series 1 unpack your printer HP #57 *Q3046-90101* Q3046-90101 2 plug in the power cord Place the printer at least 10 inches (250 mm) away from any obstruction to allow space for the paper to move through the printer during printing. 1. Connect the power cord to the back of your printer. 2. Plug the power cord into a working electrical outlet. Important: Make sure the power cord does not block the rear paper path. Rear paper path 3 load an index card Note: The index card will be used to print a calibration page in step 6. 1. Open the paper tray door. 2. Place an index card from the sample pack on the paper tray and slide the card underneath the output guide. 3. Move the paper width guide to fit close to the left edge of the index card without bending the card. Paper width guide Paper tray Output guide