HP Photosmart 240 HP Photosmart 240 series - (English) Setup Guide - Page 2
turn on your printer, install the print cartridge, print your first photo, remove the tape, need - ink cartridge
View all HP Photosmart 240 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
4 remove the tape 5 install the print cartridge 1 2 3 1. Open the print cartridge package. 1. Open the print cartridge door. 2. Pull the pink pull-tab to remove the clear tape from the print cartridge. 2. Place the HP #57 tri-color print cartridge in the print cartridge cradle with the copper contacts facing toward the inside of the printer and the ink nozzles facing down. 3. Push the print cartridge into the cradle until you feel it snap into place. 4. Close the print cartridge door. Do not touch or remove the ink nozzles or the copper contacts! Print cartridge door 6 turn on your printer 1. Press the ON button on the top of the printer. 2. Press the OK button. A calibration page prints on the previously loaded index card. On button OK button 7 print your first photo 1. Place a few sheets of photo paper in the paper tray with the glossy side up and the tab closest to the inside of the printer. Slide the paper underneath the output guide 2. Move the paper width guide to fit close to the left edge of the paper without bending the paper. 3. Insert a memory card that contains digital photos into the correct memory card slot. Note: Push the memory card into the printer until it stops-it does not insert all the way into the printer. The memory card light flashes while the printer reads the memory card. 4. When Select Layout: appears, press the OK button to select the 1 photo layout. 5. When the first photo stored on the memory card appears on the printer's LCD screen, press the PRINT button to print it. Memory card slots Memory card light OK button Print button need more help? ? www.hp.com/support Printed in USA 05/03 v1.1.0 • Printed on recycled paper © 2003 Hewlett-Packard Company