HP Presario CQ20-400 Compaq Presario CQ20 Notebook PC - Maintenance and Servic - Page 61
from the display enclosure, and then release the microphone, from the clips in the display enclosure. - lcd
View all HP Presario CQ20-400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
Removal and replacement procedures 5. To remove the microphone cable or WLAN transceivers and cable: ✎ The microphone, WLAN antenna cable, and the LCD module cable are included in the Cable Kit, spare part number 493275-001. a. Remove the two Phillips PM2.0×6.0 screws 1 and display hinge covers 2. b. Remove the two microphone receivers 1 from the display enclosure, and then release the microphone cable 2 from the clips in the display enclosure. Reverse this procedure to install the microphone. c. Remove the adhesive tape from the WLAN transceiver 1, and then release the WLAN cables 2 from the clips in the display enclosure. Reverse this procedure to install the WLAN transceivers and cable. Maintenance and Service Guide 4-29
Removal and replacement procedures
Maintenance and Service Guide
4–29
5. To remove the microphone cable or WLAN transceivers and cable:
✎
The microphone, WLAN antenna cable, and the LCD module cable are included in the Cable Kit, spare part
number 493275-001.
a.
Remove the two Phillips PM2.0×6.0 screws
1
and display hinge covers
2
.
b.
Remove the two microphone receivers
1
from the display enclosure, and then release the microphone
cable
2
from the clips in the display enclosure.
Reverse this procedure to install the microphone.
c.
Remove the adhesive tape from the WLAN transceiver
1
, and then release the WLAN cables
2
from the
clips in the display enclosure.
Reverse this procedure to install the WLAN transceivers and cable.