HP Presario CQ20-400 Compaq Presario CQ20 Notebook PC - Maintenance and Servic - Page 71
from the system board by lifting it straight up., Remove the modem module, cable, adhesive tape
View all HP Presario CQ20-400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
Removal and replacement procedures Remove the modem module: 1. Turn the system board upside down with the rear edge toward you. 2. Remove the two Phillips PM2.0×3.0 screws 1 that secure the modem module to the system board. 3. Disconnect the modem module 2 from the system board by lifting it straight up. 4. Remove the modem module, cable, adhesive tape, and RJ-ll port. Reverse this procedure to install the modem module and modem module cable. Maintenance and Service Guide 4-39
Removal and replacement procedures
Maintenance and Service Guide
4–39
Remove the modem module:
1. Turn the system board upside down with the rear edge toward you.
2. Remove the two Phillips PM2.0×3.0 screws
1
that secure the modem module to the system board.
3. Disconnect the modem module
2
from the system board by lifting it straight up.
4. Remove the modem module, cable, adhesive tape, and RJ-ll port.
Reverse this procedure to install the modem module and modem module cable.