HP Presario CQ61-200 Compaq Presario CQ61 Notebook PC and HP G61 Notebook PC - - Page 82
spring-loaded captive screws, that secure the fan/heat sink assembly.
View all HP Presario CQ61-200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
Removal and replacement procedures Remove the fan/heat sink assembly: ✎ Due to the adhesive quality of the thermal material located between the fan/heat sink assembly and system board components, you may need to move the fan/heat sink assembly from side to side to detach the assembly. Ä CAUTION: To avoid damage to the processor, loosen the fan/heat sink assembly screws in the sequence indicated on the heat sink assembly. Likewise, tighten the screws in the same sequence when installing the fan/heat sink assembly. ✎ Steps 1 through 4 apply only to computer models equipped with graphics subsystems having UMA memory. 1. Turn the system board right-side up, with the front toward you. 2. Disconnect the fan cable 1 from the system board. 3. Following the 1, 2, 3 sequence stamped into the fan/heat sink assembly, loosen the 3 Phillips PM2.5×6.0 spring-loaded captive screws 2 that secure the fan/heat sink assembly. 4. Remove the fan/heat sink assembly 3 by lifting it straight up. Maintenance and Service Guide 4-39