HP Pro 3500 Maintenance & Service Guide HP Pro 3400, 3405 and 3410 Microto - Page 20
Computer Setup—Storage - raid
View all HP Pro 3500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Computer Setup-Storage NOTE: Support for specific Computer Setup options may vary depending on the hardware configuration. Table 3-3 Computer Setup-Storage Option Device Configuration Storage Options Description Lists all installed BIOS-controlled storage devices. When a device is selected, detailed information and options are displayed. The following options may be presented: Hard Disk: Size, model, firmware version, serial number. Emulation type has the following choices: ● None (prevents BIOS data accesses and disables it as a boot device) ● Hard Disk (treated as a hard disk) CD-ROM: Model, firmware version, serial number. SATA Emulation Allows you to choose how the SATA controller and devices are accessed by the operating system. There are two supported options: IDE and AHCI. The default is set based on the Feature Byte code stored in the SMBIOS Type11/Feature Byte string as follows: Feature Byte Default FBC_SATA_RAID RAID FBC_SATA_AHCI AHCI FBC_SATA_IDE IDE Otherwise (none found) Platform-dependent - to be implemented by BIOS Integrator IDE - This is the most backwards-compatible setting of the three options. Operating systems usually do not require additional driver support in IDE mode. AHCI (default option) - Allows operating systems with AHCI device drivers loaded to take advantage of more advanced features of the SATA controller. 10 Chapter 3 Computer Setup (F10) Utility