HP ProBook 4525s HP ProBook 4525s Notebook PC - Maintenance and Service Guide - Page 99
RJ-11 connector assembly, Remove the Phillips PM2.5×3.0 screw
View all HP ProBook 4525s manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 99 highlights
9. Remove the thermal shield (see Thermal shield on page 56). 10. Remove the display assembly (see Display assembly on computers with 15.6-in displays on page 71). 11. Remove the palm rest (see Palm rest on page 67). 12. Remove the hard drive (see Hard drive on page 69). 13. Remove the top cover (see Top cover on page 77). Remove the USB connector assembly: 1. Position the computer right-side up with the right side toward you. 2. Remove the Phillips PM2.5×3.0 screw (1) that secures the USB connector assembly to the base enclosure. 3. Disconnect the cable from the system board (2). 4. Remove the USB connector assembly (3) from the base enclosure. Reverse this procedure to install the USB connector assembly. RJ-11 connector assembly NOTE: The RJ-11 connector assembly is included in the Base Cable Kit, spare part number 613224-001 for 15.6-in computers. Component replacement procedures 91