HP ProBook 4545s HP ProBook 4545s Notebook PC - Maintenance and Service Guide - Page 58
Fan, Rotate and lift the fan
View all HP ProBook 4545s manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
Fan Description Fan Spare part number 646285-001 Before removing the fan, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 34). 5. Remove the following components: a. Bottom door (see Bottom door on page 35). b. Metal heat shield (see Metal heat shield on page 48). Remove the fan: 1. Position the computer upside-down with front towards user. 2. Disconnect the fan cable (1) from the system board. 3. Remove the single Phillips PM2.5×6.0 screw (2) that secures the fan to the system board. 4. Rotate and lift the fan (3) from the system board. Reverse this procedure to install the fan. NOTE: To properly ventilate the computer, allow at least a 7.6-cm (3-in) clearance on the left side of the computer. The computer uses an electric fan for ventilation. The fan is controlled by a temperature sensor and is designed to turn on automatically when high temperature conditions exist. These conditions are 50 Chapter 4 Removal and replacement procedures