HP ProBook 4545s HP ProBook 4545s Notebook PC - Maintenance and Service Guide - Page 79
Power cable
View all HP ProBook 4545s manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
3. Lift the battery from the system board (2). Reverse this procedure to install the RTC battery. Power cable The power cable is included in the Cable Kit, spare part number 683477-001. Before removing the power cable, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 34). 5. Remove the following components: a. Bottom door (see Bottom door on page 35). b. Hard drive (see Hard drive on page 42). c. Optical drive (see Optical drive on page 39). d. Metal heat shield (see Metal heat shield on page 48). e. Fan (see Fan on page 50). f. Heat sink (see Heat sink on page 51). g. Keyboard (see Keyboard on page 44). h. Top cover (see Top cover on page 55). i. System board (see System board on page 67). Component replacement procedures 71