HP ProBook 655 Maintenance and Service Guide - Page 88
Audio board, Remove 2 M2x3L P1 screws
View all HP ProBook 655 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
Audio board Description Audio board Spare part number 840692-001 IMPORTANT: Make special note of each screw and screw lock size and location during removal and replacement Before removing the audio board, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the following components: a. Service door (see Service door on page 37). b. Remove the battery (see Battery on page 38) c. Hard drive (see Hard drive on page 39). d. Solid-state drive (see Solid-state drive (select products only) on page 41). e. Optical drive (see Optical drive on page 46). f. Keyboard (see Keyboard on page 48). g. Hinge covers (see Hinge cover on page 55). h. Base enclosure (see Base enclosure on page 57). i. System board (see System board on page 59). j. Fan/heat sink assembly (see Fan and heat sink assembly on page 61). k. Top cover (see Top cover and TouchPad on page 65). Remove the audio board: ▲ Remove 2 M2x3L P1 screws (1), and then remove the audio board (2). 78 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts