HP ProBook 6565b HP ProBook 6565b Notebook PC - Maintenance and Service Guide - Page 59
Hard drive, Loosen the three captive Phillips screws
View all HP ProBook 6565b manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
Hard drive NOTE: All hard drive spare part kits include a hard drive bracket and screws. Description 750-GB, 7200-rpm hard drive 500-GB, 7200-rpm hard drive 320-GB, 7200-rpm hard drive 320-GB, 7200-rpm hard drive (Self-Encrypting Drive (SED)) Solid-state drive, 128-GB Spare part number 633252-001 634926-001 641672-001 641674-001 662394-001 Before disassembling the computer, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 40). 5. Remove the bottom door (see Bottom door on page 46). Remove the hard drive: 1. Position the computer upside-down, with the battery bay toward you. 2. Loosen the three captive Phillips screws (1) that secure the hard drive to the computer. 3. Grasp the Mylar tab on the hard drive and slide the hard drive to the right (2) to disconnect it from the system board connector. Component replacement procedures 51