HP ProDesk 400 G5 Micro PC Commercial BIOS UEFI Setup - Page 91
The following table describes various settings for configuring
View all HP ProDesk 400 G5 Micro manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 91 highlights
HP PC Commercial BIOS (UEFI) Setup July 2020 919946-004 Feature o Pre-boot HBMA Support Type Setting Description Set Host Based MAC Address (HBMA) support in the preboot environment such as PXE. Windows HBMA Support Setting Set host-based MAC address (HBMA) support in the Windows OS environment. Single NIC Operation (Disable All Other NICs when HBMA is active on one NIC) HBMA Priority List Setting Setting When within Windows OS, only one NIC will operate using Host Based MAC Address (HBMA). This feature does not apply to PXE environments. Change the priority of USB and embedded Network Interface Cards (NICs) for the system. Default Checked but disabled until Host Based MAC Address is Enabled Checked but greyed out until Host Based MAC Address is Enabled Unchecked but greyed out until Host Based MAC Address is Enabled Notes Notebook Only Notebook Only Notebook Only Notebook Only 8.14 Thunderbolt™ Options The following table describes various settings for configuring Thunderbolt™ ports, previously located in the Port Options menu. This menu organization is new in 2019 for platforms supporting Thunderbolt™ technology. There still remains a setting in Port Options to turn the Thunderbolt™ port on or off. Feature Thunderbolt™ Mode Require BIOS PW to change Thunderbolt™ Security Level Type Setting Setting Description When checked, enables Thunderbolt™ connections on the Type-C port. When checked, Thunderbolt™ Security Level cannot be changed unless a BIOS administrator password has been created. This setting cannot be disabled if DMA Protection (System Options) is enabled. Default Checked Checked Notes © Copyright 2016-2019 HP Development Company, L.P. 8 Advanced Menu (2019 and older) 91