HP ProDesk 600 G6 PCI Micro Maintenance and Service Guide - Page 32
Optical drive, Disconnect the power cable
View all HP ProDesk 600 G6 PCI Micro manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Remove the access panel: ▲ Loosen the thumbscrew on the rear of the computer (1), slide the panel backward (2), and lift if off the computer. To install the access panel, reverse the removal procedure. Optical drive To remove the optical drive, use these procedures. Before removing the optical drive, follow these steps: 1. Prepare the computer for disassembly (Preparation for disassembly on page 23). 2. Remove the access panel (Access panel on page 23). Remove the optical drive: 1. Disconnect the power cable (1) and data cable (2) from the rear of the optical drive. 24 Chapter 4 Removal and replacement procedures ENWW
Remove the access panel:
▲
Loosen the thumbscrew on the rear of the computer
(1)
, slide the panel backward
(2)
, and lift if off the
computer.
To install the access panel, reverse the removal procedure.
Optical drive
To remove the optical drive, use these procedures.
Before removing the optical drive, follow these steps:
1.
Prepare the computer for disassembly (
Preparation for disassembly
on page
23
).
2.
Remove the access panel (
Access panel
on page
23
).
Remove the optical drive:
1.
Disconnect the power cable
(1)
and data cable
(2)
from the rear of the optical drive.
24
Chapter 4
Removal and replacement procedures
ENWW