HP ProDesk 600 G6 PCI Micro Maintenance and Service Guide - Page 41
Memory modules (DIMMs), Industry-standard 288-pin
View all HP ProDesk 600 G6 PCI Micro manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
13. Install four 6-32 silver screws in the adapter bracket (two on each side of the bracket). Memory modules (DIMMs) To remove the memory modules, use this information and procedures. Table 4-3 Memory module descriptions Description 32 GB 1.2 V DDR4-3200 NECC UDIMM memory module 16 GB 1.2 V DDR4-3200 NECC UDIMM memory module 8 GB 1.2 V DDR4-3200 NECC UDIMM memory module 4 GB 1.2 V DDR4-3200 NECC UDIMM memory module 32 GB 1.2 V DDR4-2666 NECC UDIMM memory module 16 GB 1.2 V DDR4-2666 NECC UDIMM memory module 8 GB 1.2 V DDR4-2666 NECC UDIMM memory module 4 GB 1.2 V DDR4-2666 NECC UDIMM memory module The memory sockets on the system board are populated with at least one preinstalled memory module. To achieve the maximum memory support, you can populate the system board with up to 64 GB of memory configured in a high-performing dual-channel mode. For proper system operation, the DIMMs must adhere to the following specifications: ● Industry-standard 288-pin ● Unbuffered non-ECC PC4-19200 DDR4-2400/2666 MHz-compliant ● 1.2 volt DDR4-SDRAM memory modules ENWW Memory modules (DIMMs) 33