HP ProLiant BL490c HP BladeSystem c-Class Enclosure Troubleshooting Guide - Page 30
Procedures: Fan LED is solid amber, Fan LED is off action and verification
View all HP ProLiant BL490c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Step Step 4 Step 5 Fan LED is off action and verification Action Depending on the enclosure, complete each step in the "Troubleshooting the Insight Display (on page 16)" section. Perform the verification in this step after completing each Insight Display troubleshooting step. Verification If the fan health LED continues to flash after verifying each of the Insight Display troubleshooting steps, then continue to the next Insight Display troubleshooting step. If the fan health LED continues to flash after completing all of the Insight Display troubleshooting steps, then continue to the next step. Action A connection problem between the fan and the Insight Display is indicated. Contact an HP authorized service provider and complete the steps in the "Midplane assembly replacement (on page 69)" section. Verification If the suspect fan health LED is solid green, then the repair is complete. If any new error indications appear, then follow the troubleshooting instructions for those errors. Procedures: Fan LED is solid amber CAUTION: Some troubleshooting procedures require powering down an entire enclosure. To avoid possible data loss, always secure permission before powering down an enclosure. CAUTION: To avoid data loss, do not remove an Onboard Administrator when the Insight Display shows a firmware update in progress. During this activity, the Insight Display displays the Firmware Update screen with the Lock icon and the firmware update progress bar. Step Step 1 Step 2 Step 3 Fan LED is solid amber action and verification Action Visually inspect the fan for damage or obstruction: 1 Remove the fan. 2 Inspect the fan blades for damage or obstruction. 3 Return the fan to the original fan bay. Verification If the fan LED is solid green, then the repair is complete. If the fan LED changes from green to solid green after a few minutes, then continue to the next step. Action Remove the suspect fan, and then install it in a known-working fan bay. Verification If the error still exists, then replace the fan to complete the repair. If the fan LED is solid green, then continue to the next step. Action Install a known-working fan into the suspect fan bay. Enclosure troubleshooting 30