HP ProLiant BL495c HP BladeSystem c-Class Enclosure Troubleshooting Guide - Page 27
Fan troubleshooting, Symptoms: Fan failure
View all HP ProLiant BL495c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
• Onboard Administrator modules • Fans • AC power inputs To correct a device error: 1. Use the arrow buttons to navigate to Fix This, and press OK. 2. Review and complete the corrective action suggested by the Insight Display. In most cases, you must remove the failed component to clear the error. 3. Replace the failed component with a spare, if applicable. If the device failure error is an AC power input error, be sure the AC power input is supplied with power to clear the error. 4. If the suggested corrective action does not correct the error, see the device-specific troubleshooting section. Always begin troubleshooting using the symptom table at the beginning of each section. Fan troubleshooting Fans provide proper cooling for the enclosure. This section provides the steps required to ensure that the fans are operating properly and in the correct locations within the enclosure. For all removal and replacement procedures used in this document, see the appropriate enclosure maintenance and service guide on the HP website (http://www.hp.com/go/bladesystem/documentation). For specific component LED definitions and component identification, see "Component identification (on page 72)." Symptoms: Fan failure Fan LED condition Initial step A single fan LED is flashing amber. - The Insight Display may also be reporting a device identification error for the fan. A single fan LED is solid amber. - The Insight Display may also be reporting a device failed error for the fan. All fan LEDs are flashing amber. - A row of fan LEDs are all dim amber or - all off. A single fan LED is off. - A fan LED is solid green, and the Insight Display reports a location error Verify the fan population. A fan is located in the wrong bay according to the fan population rule. Required steps Begin with step 1 of "Procedures: Fan LED is flashing amber (on page 28)." Begin with step 1 of "Procedures: Fan LED is solid amber (on page 30)." Begin with step 5 of "Procedures: Fan LED is flashing amber (on page 28)." Begin with step 4 of "Procedures: Fan LED is off (on page 29)." Begin with step 4 of "Procedures: Fan LED is off (on page 29)." To correct the issue, follow the Insight Display steps. Begin by selecting Fix on the Insight Display. Enclosure troubleshooting 27