HP ProLiant BL495c HP BladeSystem c-Class Enclosure Troubleshooting Guide - Page 37
Error indication, Initial step, Required steps, The Insight Display device bay
View all HP ProLiant BL495c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Error indication Initial step Required steps A server blade does not power up. - The following conditions exist: • The power LED is amber. • The health LED is off. Press the server blade Power On/Standby button. If the server blade does not power on, then begin with step 4. • The Insight Display device bay status is dark green. A server blade does not power up. - The following conditions exist: • The power LED is amber. • The health LED is flashing amber. • The Insight Display device bay status is dark green. Troubleshoot the processor to correct the issue. Perform the following steps as instructed in the server blade documentation: 1 Remove the server blade. 2 Remove the processor. 3 Install a spare processor. 4 Install the server blade in the original device bay. 5 If the server blade powers up, then the repair is complete. If the server blade does not power up, then replace the server blade. A server blade is powered up. The following conditions exist: • The power LED is green. • The health LED is green. • The Insight Display device bay status is blue. No iLO 2 IP address results in iLO 2 on this server blade has no IP the following conditions: address. • No iLO 2 web or SSH To configure the iLO 2 IP address, access reboot the server blade and use the • No enclosure DVD-ROM iLO 2 ROM setup during POST. drive support for this server blade • No server blade information provided to the Onboard Administrator • No remote console or remote media support Enclosure troubleshooting 37