Home » HP Manuals » Servers » HP ProLiant ML310e » Manual Viewer

HP ProLiant ML310e HP Scripting Toolkit 9.30 for Linux User Guide - Page 47

HBA_WW_ID, HostMode, ACU scripting error messages, Microsoft Windows

Add to My Manuals
Save this manual to your list of manuals

Page 47 highlights

The string can consist of the following: • A maximum of 16 characters • Embedded space characters but cannot end with a space character • Any of the following characters: a-z, A-Z, 0-9 and [space] HBA_WW_ID This option specifies which HBA, based on its assigned WWN, is modified by the configuration changes. HostMode This option specifies the HostMode for a selected HBA. Setting the Host Mode optimizes the storage array for the selected operating system. The available host modes for an HBA are device-specific. Not all modes are available on all devices. Not all HBAs support a HostMode. The following operating system options might be available: • Default • Microsoft Windows • OpenVMS • Tru64 • Linux • Solaris • Netware • HP-UX ACU scripting error messages Error code Error message Comment or clarification 1 General error. The ACU process cannot be initiated. You might see this error message if you are not authenticated to use ACU or if ACU is already running. 268 Error saving controller. ACU cannot save one or more controller configurations. 278-282 Controller is locked by another machine or - user. 290 Error communicating with controller. - 516 Internal error. An error occurred during the configuration process, but ACU cannot identify the error because there is an internal ACU error. 1052 Array requires an odd number of drives. This error message occurs if you attempt to add an odd number of drives to an array that has RAID 1 logical drives, and the controller does not support RAID-level migration. 1053 Cannot remove physical drives from existing array. This error message occurs if a script that is running in Reconfigure action mode lists fewer physical drives than already exist in the array. ACU interprets this script as a request to remove physical drives from an existing array, but satisfying this request causes data loss, so ACU prevents the script from running. 1065-1066 Too many coinciding expansion, migration, ACU does not support multiple simultaneous expansions, or extension operations. migrations, or extensions without saving the configuration Using HPACUSCRIPTING 47

Section	Page
HP Scripting Toolkit for Linux User Guide	1
Contents	3
1 Introduction	7
Scripting Toolkit	7
Minimum requirements	7
2 Deployment using the Scripting Toolkit	8
Deployment overview	8
Sample deployment procedure	8
Creating a network share	9
Capturing a reference configuration from the source server	9
Creating an ISO image to be written to media	10
Configuring the target server	10
Installing the operating system	11
3 Booting and OS installation	12
SYSLINUX	12
Booting using PXE	12
Setting up a TFTP server	13
Populating the TFTP directory share	14
Setting up a DHCP server	14
Booting from a USB drive key	15
Performing an unattended operating system installation	15
System hardware configuration	15
Microsoft Windows install_win.sh sample script	19
Red Hat Linux anaconda-ks.cfg sample file	19
4 Scripting Toolkit utilities	22
Native package formats	22
Syntax conventions	22
Utility online help	22
Using Scripting Toolkit utilities	23
Using REBOOT	23
REBOOT command-line syntax	23
REBOOT command-line arguments	23
REBOOT return codes	23
REBOOT command-line examples	24
Using SETBOOTORDER	24
SETBOOTORDER command-line syntax	24
SETBOOTORDER command-line arguments	24
SETBOOTORDER return codes	24
SETBOOTORDER command-line examples	24
Using STATEMGR	24
STATEMGR command-line syntax	25
STATEMGR command-line arguments	25
STATEMGR return codes	25
STATEMGR command-line examples	25
Using RBSURESET	25
RBSURESET command-line syntax	26
RBSURESET command-line arguments	26
RBSURESET return codes	26
Using BOOTEXTRACT	26
BOOTEXTRACT command-line syntax	26
BOOTEXTRACT command-line arguments	26
BOOTEXTRACT return codes	26
Using HPDISCOVERY	26
HPDISCOVERY command-line syntax	27
HPDISCOVERY command-line arguments	27
HPDISCOVERY return codes	27
HPDISCOVERY command-line examples	27
Using IFHW	27
IFHW command-line syntax	27
IFHW command-line arguments	27
IFHW return codes	28
IFHW command-line examples	28
Expression operators and terms	28
Expression examples	29
Using HWQUERY	29
HWQUERY command-line syntax	29
HWQUERY command-line arguments	29
HWQUERY return codes	29
HWQUERY command-line examples	30
Using CONREP	30
CONREP command-line syntax	31
CONREP command line arguments	31
CONREP return codes	31
CONREP screen output	31
CONREP -s (Store to Data file) Example usage for HP ProLiant servers not using the Oxx ROM family	32
CONREP –l (Load from Data File) Example Usage for HP ProLiant servers not using the Oxx ROM family	32
CONREP Data File Sample Contents for HP ProLiant servers not using the Oxx ROM family	32
CONREP command file contents for HP ProLiant servers not using the Oxx ROM family	33
Using HPRCU	34
HPRCU command-line syntax	34
HPRCU command line arguments	35
HPRCU return codes	35
HPRCU sample XML format	35
Using HPACUSCRIPTING	36
Capturing a configuration	36
Using an Input script	36
Creating an ACU script file	37
Sample custom input script	37
Script file options	38
Control category	39
Action mode	40
Method mode	40
Controller category	40
Controller	40
ChassisName	41
ClearConfigurationWithDataLoss	41
LicenseKey, DeleteLicenseKey	41
PreferredPathMode	41
ReadCache, WriteCache	41
RebuildPriority, ExpandPriority	42
SSPState	42
SurfaceScanDelay	42
Video performance options	42
Array category	43
Array	43
Drive	43
DriveType	43
OnlineSpare	44
Logical Drive category	44
ArrayAccelerator	44
LogicalDrive	44
LogicalDriveSSPState	44
ParityGroups	45
PreferredPath	45
RAID	45
Sectors	45
Size	45
SSPAdaptersWithAccess	46
StripeSize	46
HBA category	46
ConnectionName	46
HBA_WW_ID	47
HostMode	47
ACU scripting error messages	47
Using HPLPCFG	51
HPLPCFG command-line syntax	51
HPLPCFG command-line arguments	51
HPLPCFG return codes	51
HPLPCFG command-line examples	52
Using LO100CFG	52
LO100CFG command-line syntax	52
LO100CFG command-line arguments	53
LO100CFG return codes	53
LO100CFG command-file contents	53
Using HPQLAREP	54
HPQLAREP command-line syntax	54
HPQLAREP command-line arguments	54
HPQLAREP return codes	55
HPQLAREP command-line examples	55
Using HPONCFG	56
HPONCFG command-line syntax	56
HPONCFG command-line arguments	56
HPONCFG return codes	57
HPONCFG command file contents	57
Obtaining an entire configuration	57
Obtaining a specific configuration	58
Setting a configuration	59
HPONCFG command-line examples	59
5 Troubleshooting	60
Troubleshooting table	60
6 Support and other resources	61
Information to collect before contacting HP	61
How to contact HP	61
Subscription service	61
Related information	61
Scripting Toolkit support	62
Typographic conventions	62
HP Insight Remote Support software	62
7 Documentation feedback	64
Acronyms and abbreviations	65

Match case Limit results 1 per page

The string can consist of the following:

•

A maximum of 16 characters

•

Embedded space characters but cannot end with a space character

•

Any of the following characters: a–z, A–Z, 0–9, !, @, #, *, (, ), -, _, +, :, ., /, and [space]

HBA_WW_ID

This option specifies which HBA, based on its assigned WWN, is modified by the configuration

changes.

HostMode

This option specifies the HostMode for a selected HBA. Setting the Host Mode optimizes the storage

array for the selected operating system. The available host modes for an HBA are device-specific.

Not all modes are available on all devices. Not all HBAs support a HostMode.

The following operating system options might be available:

•

Default

•

Microsoft Windows

•

OpenVMS

•

Tru64

•

Linux

•

Solaris

•

Netware

•

HP-UX

ACU scripting error messages

Comment or clarification

Error message

Error code

The ACU process cannot be initiated. You might see this error

message if you are not authenticated to use ACU or if ACU

is already running.

General error.

ACU cannot save one or more controller configurations.

Error saving controller.

268

—

Controller is locked by another machine or

user.

278-282

—

Error communicating with controller.

290

An error occurred during the configuration process, but ACU

cannot identify the error because there is an internal ACU

error.

Internal error.

516

This error message occurs if you attempt to add an odd

number of drives to an array that has RAID 1 logical drives,

and the controller does not support RAID-level migration.

Array requires an odd number of drives.

1052

This error message occurs if a script that is running in

Reconfigure action mode lists fewer physical drives than

Cannot remove physical drives from

existing array.

1053

already exist in the array. ACU interprets this script as a

request to remove physical drives from an existing array, but

satisfying this request causes data loss, so ACU prevents the

script from running.

ACU does not support multiple simultaneous expansions,

migrations, or extensions without saving the configuration

Too many coinciding expansion, migration,

or extension operations.

1065-1066

Using HPACUSCRIPTING