HP ProLiant XL220a HP ProLiant XL220a Gen8 v2 Server User Guide - Page 20
Setup, Setup overview, Installing the chassis into a rack, Installing hardware options
View all HP ProLiant XL220a manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Setup Setup overview Installation of a server requires the following steps: 1. Install and configure a chassis. 2. Install any server options. 3. Install I/O modules in the chassis. 4. Connect the I/O modules to the network. 5. Install a server. 6. Install an operating system. 7. Install system software. 8. Register the product. Installing the chassis into a rack To install the chassis into a rack, see the HP Apollo a6000 Chassis Setup and Installation Guide on the HP website (http://www.hp.com/go/Apollo_6000/docs). For more information, see the instructions included with the rail kit. Installing hardware options Before installing and initializing the server, install any hardware options. For options installation information, see the documentation that ships with the option. For server-specific information, see "Hardware options installation (on page 23)." Installing I/O modules and connecting them to the network If the server supports I/O module installation, install the I/O modules in the rear of the chassis in the bay that corresponds to the server. For specific steps to install I/O modules and connect them to the network, see the documentation that ships with the interconnect module or the HP Apollo a6000 Chassis Setup and Installation Guide on the HP website (http://www.hp.com/go/Apollo_6000/docs). Installing a server Setup 20