HP Q3717A HP Color LaserJet 5550 series - User Guide - Page 175
Storage Write Fail, X Storage Error
View all HP Q3717A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 175 highlights
Control panel messages (continued) Control panel message Description Recommended action 59.XY PRINTER ERROR For help press alternates with 59.XY PRINTER ERROR To continue turn off then on A printer motor error has occurred. 1. Turn the printer off and then back on. 2. If the problem persists, contact HP Support at http://www.hp.com/ support/clj5550. Note: This message might also appear if the transfer unit is missing or incorrectly installed. Ensure that the transfer unit is correctly installed. 62 NO SYSTEM To continue turn off then on No system was found. 1. Turn the printer off and then back on. 2. If the problem persists, contact HP Support at http://www.hp.com/ support/clj5550. 68.X PERMANENT STORAGE FULL For help press alternates with 68.X PERMANENT STORAGE FULL To continue press A non-volatile storage device is full. Pressing the button should clear the message. Printing can continue, but there may be unexpected behavior. X Description 0 for onboard NVRAM 1 for removable disk (flash or hard) 1. Press to continue. 2. For 68.0 errors, turn the printer off and then back on. 3. If a 68.0 error persists, contact HP Support. 4. For 68.1 errors, use the HP Web Jetadmin software to delete files from the disk drive. 5. For 68.1 errors that persist, contact HP Support. 68.X PERMANENT STORAGE WRITE FAIL To continue press A non-volatile storage device is full. Pressing the button should clear the message. Printing can continue, but there may be unexpected behavior. X Description 0 for onboard NVRAM 1 for removable disk (flash or hard) 1. Press to continue. 2. If the message persists, turn the printer off and then back on. 3. If the problem persists, contact HP Support at http://www.hp.com/ support/clj5550. 68.X STORAGE ERROR SETTINGS CHANGED For help press alternates with 68.X STORAGE ERROR SETTINGS CHANGED To continue press One or more printer settings saved in the 1. Press to continue. non-volatile storage device is invalid and has been reset to its factory default. Pressing the button should clear the 2. If the message persists, turn the printer off and then back on. message. Printing can continue, but 3. If the problem persists, contact there may be unexpected behavior. HP Support at http://www.hp.com/ support/clj5550. 79.XXXX PRINTER ERROR To continue turn off then on A critical hardware error has occurred. 1. Turn the printer off and then back on. 2. If the problem persists, contact HP Support at http://www.hp.com/ support/clj5550. ENWW Control panel messages 161