HP Q3717A HP Color LaserJet 5550 series - User Guide - Page 179
Manually Feed, Write Protected
View all HP Q3717A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 179 highlights
Control panel messages (continued) Control panel message Description Recommended action FLASH IS WRITE PROTECTED To clear press alternates with Ready The file system device is protected and no new files can be written to it. 1. To enable writing to the Flash Memory, turn off write protection, using HP Web Jetadmin. 2. To clear the message, press the key. 3. If the message persists, turn the printer off and then back on. Genuine HP supplies installed A new HP cartridge has been installed. The printer returns to the Ready state after approximately 10 seconds. No action necessary. If no paper in tray: MANUALLY FEED For help press alternates with MANUALLY FEED To use another tray press A job was sent that specified MANUAL FEED and Tray 1 is empty. Load Tray 1 with the specified media. OR To use media from another tray, press and select the tray from the list. Incorrect The wrong PIN was entered. After three incorrect PIN entries, the printer will return to Ready. Re-enter PIN correctly. INCORRECT CARTRIDGE alternates with For help press The supplies gauge will display the consumption levels of print cartridges. A cartridge is installed in the wrong slot and the cover is closed. 1. Open the top cover and image transfer unit. CAUTION The image transfer unit can be easily damaged. 2. Remove the incorrect print cartridge. 3. Install the correct print cartridge. 4. Close the front cover. INCORRECT SUPPLIES For status press The supplies gauge will display the consumption levels of print cartridges. At least one supply item is incorrectly positioned in the printer and another supply item is missing, incorrectly placed, out, or low. 1. Press to access the SUPPLIES STATUS menu. 2. Press and to highlight the specific supply that has a problem. 3. Press to view help for the supply. 4. Press and to step through the instructions. Initializing permanent storage Displayed when the printer is turned on to show that permanent storage is being initialized. No action necessary. Initializing... This message is displayed when the printer is turned on, as soon as the individual tasks begin initialization. No action necessary. ENWW Control panel messages 165