HP Q3723A HP LaserJet 9040/9050 - User Guide - Page 163
abel construction, Adhesives, Arrangement, Condition, Symptom, Problem, Solution
View all HP Q3723A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 163 highlights
CAUTION CAUTION Note Symptom Problem Excessive curl Problems with feeding Too moist, wrong grain direction or short-grain construction Jamming, damage to printer Cutouts or perforations Problems with feeding Ragged edges Multi-sheet feeding Paper sticking together Solution ● Use the left output bin or the upper bin. ● Use long-grain paper. Use paper free of cutouts or perforations. Use supported types of paper. Remove paper, fan it, and reload paper. Labels To avoid damaging the printer, use only labels recommended for use in monochrome laser printers. Never print on the same sheet of labels more than once. tDhoanno2t1p6rign/tmo2n both sides of (58 lb bond). labels, transparencies, envelopes, custom paper, Damage to the printer and jams might result. or paper heavier Label construction When selecting labels, consider the quality of each component: ● Adhesives: The adhesive material should be stable at 200°C (392°F), the maximum fusing temperature of the printer. ● Arrangement: Only use full-sheet labels. Labels can peel off sheets with spaces between the labels, causing serious jams. ● Curl: Prior to printing, labels must lay flat with no more than 13 mm (0.5 inch) of curl in any direction. ● Condition: Do not use labels with wrinkles, bubbles, or other indications of separation. Transparencies Transparencies used in the printer must be able to withstand 200°C (392°F), the maximum fusing temperature of the printer. To avoid damaging the printer, use only transparencies recommended for use in monochrome laser printers. Dthoanno2t1p6rign/tmo2n both sides of (58 lb bond). labels, transparencies, envelopes, custom paper, Damage to the printer and jamming might result. or paper heavier If you have problems printing transparencies, use optional Tray 1 and send them to the left output bin or the upper bin. Envelopes To print envelopes, use optional Tray 1 and print them either to the left output bin or to the upper bin. ENWW Paper specifications 161