Home » HP Manuals » Multifunction Devices » HP R80xi » Manual Viewer

HP R80xi HP OfficeJet R Series All-in-One - (English) Setting Up Guide - Page 12

Connecting the Power Cord - officejet cable

UPC - 088698680193

Add to My Manuals
Save this manual to your list of manuals

Page 12 highlights

WARNING Connecting the Power Cord Choose a power outlet that is easy to access. This allows you to shut off power quickly. Power is present in the product even if the white power button on the left side of the unit's front panel was used to turn the unit off. To shut off power completely, disconnect the power cord. For safe operation, use the power cord with a properly grounded outlet. Use only the power supply (HP part number 0950-2880) that came with your HP OfficeJet. Using another adapter may be hazardous. The HP OfficeJet comes with a power supply adapter, to which an output cord is permanently attached, and a main power cord for the country to which it is shipped. If the plug on the main power cord does not look familiar, contact your dealer or local HP Sales and Support Office. 1 Plug the power supply output cord into the back of the HP OfficeJet. The power supply connector is located on the back of the unit, to the left of the printer-cable connector. NOTE Make sure that the cord is securely attached; otherwise, it may not work. 1-12 Setting Up Your New HP OfficeJet R Series

Section	Page
Setting Up Your New HPOfficeJet RSeries	1
1	1
Determining Your Computer’s Parallel Port Mode	1
Setting Up Your HPOfficeJet	2
Step 1 — Unpack Your HPOfficeJet	2
1 Remove the cardboard tray containing the accessory items.	2
2 Rest the box on its side, and pull out your HPOfficeJet.	2
3 Verify that the following items are included with your HPOfficeJet:	2
a Bi-directional parallel, IEEE 1284-compliant printer cable with 1284-C connector	2
b Power supply (AC/DC adapter) with attached cord (HP part number 0950-2880)	2
c Power cord	2
d Front-panel overlay with text on it	2
e One black and one color print cartridge	2
f CD-ROM disks	2
g Three manuals: HPOfficeJet RSeries Setup Guide, HPOfficeJet RSeries Basic Operations Guide,...	3
4 Choose a location and environment for your HPOfficeJet.	3
5 Remove the packaging materials (plastic wrap, cardboard insert, and packing tape) from the outs...	4
6 If your HPOfficeJet has an automatic document feeder (ADF), remove the packaging materials fro...	4
Step 2 — Attach the Front-Panel Overlay	5
1 Align the front-panel overlay with the front panel buttons.	5
2 Push straight down firmly on both ends and the middle to snap the overlay into place.	5
Step 3 — Load Paper in Your HPOfficeJet	6
1 Remove the packaging materials from the HPOfficeJet, if you have not already done so.	6
2 Slide the paper width and length adjusters to their outermost positions.	6
3 Insert paper into the IN tray, print side down, until it stops.	6
4 Slide the paper width and length adjusters in until they stop at the edges of the paper.	6
5 Push the IN tray back toward the unit until it stops, and lower the top (OUT) tray if you raise...	7
Step 4 — Install Print Cartridges	8
1 Locate the print-cartridge access door on the front of the HPOfficeJet, just above the OUT tray.	8
2 Pull the latch on the print-cartridge access door toward you and raise it up until it is fully ...	8
3 Remove the cardboard insert from the inside of the unit.	8
4 Raise both latches on the carriage.	8
5 Remove the color print cartridge (the thicker one) from its packaging and, being careful to tou...	8
6 Push the color print cartridge firmly down into the slot on the left.	9
7 Remove the black print cartridge (the thinner one) from its packaging and, being careful to tou...	9
8 Push the black print cartridge firmly down into the slot on the right.	9
9 Lower each print-cartridge latch down onto the top of the cartridge, and push down until the la...	10
10 Close the print-cartridge access door.	10
Step 5 — Connect the Printer Cable and Power Cord	11
Connecting the Printer Cable	11
1 Connect the printer cable to the HPOfficeJet.	11
2 Plug the other end of the cable into your computer’s parallel port.	11
Connecting the Power Cord	12
1 Plug the power supply output cord into the back of the HPOfficeJet.	12
2 Plug the adapter end of the main power cord into the power supply adapter.	13
3 Plug the power outlet end of the separate power cord into the power outlet.	13
4 If you have an ADF unit and the lid cord is not already attached, connect the cord securely to ...	13
Step 6 — Install the HPOfficeJet Software	14
Installing the HPOfficeJet RSeries Software	14
1 Turn on your computer, but do not turn on your HPOfficeJet.	14
2 If you are a Windows 95/98 user and one of the following windows appears on your screen, click ...	14
3 Insert the HPOfficeJet R Series CD-ROM into your computer’s CDROM drive.	14
a On the Windows taskbar, click Start, and then choose Run.	14
b In the Run dialog box, type z:\\setup.exe (substitute your CDROM drive letter for the “z”).	15
4 Click Install HP OfficeJet R Series Software.	15
5 After the Welcome window appears, click Next.	15
6 In the Software License Agreement window, click Yes.	15
7 After the message appears that instructs you to turn on the unit, press the white power button ...	15
8 After turning on your HPOfficeJet, click OK on your computer screen to close the Information m...	15
9 Click Next to continue.	16
10 Determine the results of the cable connection test.	16
a Click Continue to finish installing the HPOfficeJet software.	16
b Set the frontpanel language and page size manually. Follow the instructions provided later in ...	16
c After installing your software, see “Addressing Communication Tests and Cable-Connection Issues...	16
11 After the Setup Complete and Product Tour window appears with the option to view the product t...	17
12 In the product tour window, click any topic to learn more about that topic.	17
13 After you are finished, click Quit to exit the tour.	17
14 If prompted to do so, restart your computer.	17
1 Insert the HPOfficeJet RSeries CD-ROM into your computer’s CDROM drive.	18
2 In the HPOfficeJet RSeries software installation menu, click Run Product Tour.	18
Registering Your HPOfficeJet	18
Installing Third-Party Programs	18
1 Insert the HPOfficeJet RSeries CDROM into your computer’s CDROM drive.	18
2 In the HPOfficeJet RSeries software installation menu, click the name of the third-party prog...	18
3 Follow the on-screen instructions to begin and complete installation.	18
Installing Adobe PhotoDeluxe Business Edition	18
1 Insert the Adobe CDROM into your computer’s CD-ROM drive.	18
2 Follow the on-screen instructions to install the program.	18
Step 7 — Align Your Print Cartridges	19
1 If “Press Resume to Align Cartridges” or “Align Cartridges” appears on the front-panel display ...	19
2 Follow the instructions on the page above each set of paired lines.	19
Changing the Front-Panel Language	19
1 While holding down the Select/Resume button, press the Color Intensity button, and then release...	19
2 Press Select/Resume.	19
3 Press the minus(–) or plus(+) button to scroll through the available languages until the lang...	19
4 Press Select/Resume to choose the displayed language.	19
5 Press the minus(–) or plus(+) button until the desired paper size appears on the display.	19