Home » HP Manuals » Racks & Stands » HP RP36000/3 » Manual Viewer

HP RP36000/3 HP 3 Phase ERM Installation Instructions - Page 3

Insert screws through the mounting rail into the cage nuts, or clip nuts.

Get HP RP36000/3 PDF manuals and user guides

Add to My Manuals
Save this manual to your list of manuals

Page 3 highlights

1. Loosen the hex nuts, and extend the brackets to the desired length. 4. Insert screws through the mounting rail into the cage nuts or clip nuts. 2. Insert screws through the rack into the mounting rail and the front of each mounting bracket. 5. Tighten the hex nuts. 3. Install cage nuts or clip nuts into the rear of the rack.

Section	Page
Overview	1
Precautions	1
ERM kit contents	2
Tools and materials	2
Selecting a site	2
Readying the equipment	2
Installing the mounting rails	2
Preparing the rails for integrated shipping	4
Switching off the UPS battery circuit breaker	4
Switching off the ERM circuit breaker	4
Installing the ERM	4
Attaching the ERM front bezel	5
Connecting the ERM to the UPS	5
Switching on the ERM circuit breaker	5
Switching on the UPS battery circuit breaker	6

Match case Limit results 1 per page

Loosen the hex nuts, and extend the brackets to the

desired length.

Insert screws through the rack into the mounting rail and

the front of each mounting bracket.

Install cage nuts or clip nuts into the rear of the rack.

Insert screws through the mounting rail into the cage nuts

or clip nuts.

Tighten the hex nuts.