HP Rp7410 nPartition Administrator's Guide, Second Edition - Page 244
I/O Specification Format, Table A-1 Cell IDs in Global Cell Number Format
View all HP Rp7410 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 244 highlights
Table A-1 Cell IDs in Global Cell Number Format (continued) Global Format for 0 1 rp8400, rp8420, rp8440, rx8620, and rx8640 Superdome Cabinet 0 0 1 Global Format Superdome Cabinet 1 8 9 Global Format 2 3 2 3 10 11 - - 4 5 12 13 - - 6 7 14 15 • Cell Hardware Location Format In cell hardware location format, each cell is identified using two numbers that specify the cabinet and the cell slot with the cabinet where the cell resides: cabinet/slot. Table A-2 Cell IDs in Hardware Location Format Cell Slot 0 1 Hardware Location 0/0 0/1 Format for rp7405/rp7410, rp7420, rp7440, rx7620, and rx7640 Hardware Location 0/0 0/1 Format for rp8400, rp8420, rp8440, rx8620, and rx8640 Superdome Cabinet 0 0/0 0/1 Hardware Location Format Superdome Cabinet 1 1/0 1/1 Hardware Location Format 2 3 - - 0/2 0/3 0/2 0/3 1/2 1/3 4 5 - - - - 0/4 0/5 1/4 1/5 6 7 - - - - 0/6 0/7 1/6 1/7 Both cell ID formats specify the location of a cell in a complex. For example, parstatus -c9 and parstatus -c1/1 specify the same cell. # parstatus -c9 [Cell] CPU Memory Use OK/ (GB) Core On Hardware Actual Deconf/ OK/ Cell Next Par Location Usage Max Deconf Connected To Capable Boot Num cab1,cell1 active base 4/0/4 8.2/ 0.0 - no yes 1 # parstatus -c1/1 [Cell] CPU Memory Use OK/ (GB) Core On Hardware Actual Deconf/ OK/ Cell Next Par Location Usage Max Deconf Connected To Capable Boot Num cab1,cell1 active base 4/0/4 8.2/ 0.0 - no yes 1 # I/O Specification Format Use the following I/O hardware location format when specifying an I/O chassis to the nPartition configuration commands: cabinet/bay/chassis 244 nPartition Commands