HP Rx2620-2 User Service Guide, Third Edition - HP Integrity rx2620 Server - Page 20
Server Components, Processor, Memory, PCI Riser, Internal Core I/O
![]() |
UPC - 829160435749
View all HP Rx2620-2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Table 1-1 Server Dimensions Dimensions Rack units Height Width Depth Weight • Minimum • Maximum Value 2U 8.6 cm (3.4 in.) 48.3 cm (19.0 in.) 67.9 cm (26.8 in.) 17.5 kg (38.6 lb.) 22.2 kg (49.0 lb.) Server Components The server consists of the following components: Processor • 1.4 GHz/12 MB L3 cache dual-core processor • 1.6 GHz/18 MB L3 cache dual-core processor Memory 12 memory DIMM slots 256 MB, 512 MB, 1 GB, 2 GB, and 4 GB standard 184 pins 2.5 V DDR1, CL2, registered, ECC 133 MHz memory bus frequency, 266 M transfers/s data, 8.5 Gb/s peak data bandwidth Minimum memory size of 1 GB with four 256 MB DIMMs Maximum memory size of 32 GB with eight 4 GB DIMMs Upgrades must be made by quads of DIMMs DIMMs loaded by quads enable interleaved mode and chip spare PCI Riser • Four independent PCI-X 133 MHz 64 bit, 3.3 V, 15 W slots. There is no 5 V card or hot-plug support. NOTE: Some 25 W cards are supported. See the Server I/O Slot Matrix on the HP website athttp:// www.hp.com For more information regarding specific I/O cards, see http://www.docs.hp.com/en/netcom.html Internal Core I/O • Dual channel SCSI U320 interface, two internal 68-pin connectors, one 68-pin external connector • Three internal SCSI drive 80-pin type connectors that provide drive electrical hot-plug capability • One internal IDE connector for a slim-line optical device (CD and DVD) External Core I/O • One SCSI U320 68 pin connector • Two 10/100/1000Base-T Ethernet LAN connectors for twisted-pair cable • Four USB 2.0 ports • Two general purpose or 9-pin serial ports, 16550 compatible 20 Introduction
![](/manual_guide/products/hewlettpackard-rx26202-user-service-guide-edition-hp-integrity-rx2620-server-3512e77/20.png)