HP Sa3110 HP VPN Server Appliance sa3110/sa3150/sa3400/sa3450 - Installation G - Page 44
Adding a VPN Device With VPN Manager
View all HP Sa3110 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Installing HP SA3000 Series VPN Manager Adding a VPN Device With VPN Manager In this section, you add your VPN device, so that VPN Manager knows the device is accessible. Steps To add your device: 1. Open the VPN Manager software. 2. In the File Menu, select Add Device. The Add Device window appears. 3. Enter the IP address of the device. Note: Because a VPN device can have many IP addresses, you must enter an IP address on the same local network as VPN Manager, that is, a reachable address. 4. In the Host Name field, enter the Host Name of the device. By default, VPN Manager reads the host name that you already configured on the device through the console window. If you do not want to change the host name, leave this field blank. If you do change the host name, click Commit to update the configuration. 5. In the Folder field, select the device list/network layout in which you want the device information to reside. If you select All Devices, the device is placed in the All Devices folder. Note: After you add a device, you can create a new device list/network layout folder by selecting Add Folder in the File menu. 6. In the User Name field, enter admin. This is the default user name from the setup script, and is required. Note that it is case sensitive. Note: You can change the default user name by creating other Manager user names in the General tab. 7. In the Password field, enter password. This is the same administrator password that you set when you ran the setup script in the basic routing mode configuration. (See "Setting Up a Basic Routing Mode 4-4 Hewlett-Packard VPN Server Appliance SA3110/SA3150/SA3400/SA3450 Installation Guide