HP Sa3110 HP VPN Server Appliance sa3110/sa3150/sa3400/sa3450 - Installation G - Page 9

1 Purpose Overview Chapter and Appendix Contents Getting Started Getting Started The purpose of this Installation Guide is to provide you with installation instructions for Release 6.8.2 of the HP VPN Server Appliance SA3110/SA3150/SA3400/SA3450. The term VPN device is used in this document to refer to all of these devices. This manual contains six chapters and one appendix that tell you: • System hardware and software requirements for your VPN device • The function of each required component of your VPN device • Installation instructions for each of the components of the VPN device • Upgrade instructions for your VPN device • Supplementary procedures for the VPN device The following list describes the contents and purpose of each chapter, and the appendix. 1. Getting Started This chapter gives an overview of the structure of this manual and explains the function of each installation component. 2. Before You Install This chapter lists the system hardware and software requirements for installing the VPN device and gives an overview of installation prerequisites and steps. 3. Performing the Initial Hardware Setup This chapter tells you how to perform the initial hardware setup, connect your VPN device to the network, and set up a basic routing mode or bridge mode configuration on a new VPN device. 4. Installing HP SA3000 Series VPN Manager This chapter tells you how to install the VPN Manager software on your PC, create a device list with entries for your Hewlett-Packard VPN Server Appliance SA3110/SA3150/SA3400/SA3450 Installation Guide 1-1