HP Scanjet 5490c HP Scanjet 4400C/5400C Series Scanner Windows - (English) Use - Page 88
Resolving scanner messages, Resolving issues that did not generate messages, Back to TOC
View all HP Scanjet 5490c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
Back to TOC Resolving scanner messages (Some models only, see "Front panel and accessories comparisons" on page 3.) If an error message appears on the 16-character front panel LCD display on your scanner, look for the cause and solution in this section. ADF Paper Jam Pages are jammed in the ADF. See "Clearing jams from the ADF" on page 102 for information on clearing paper jams from the ADF. Clear the paper jam. If the error message does not clear, unplug the scanner and plug it back in. Error ## The scanner reported an error during the self-test. Unplug the scanner and plug it back in. If this error message is still on the scanner, contact HP support. Visit the HP support website at: http://www.hp.com/go/support See the Setup and Support Guide for phone contact information. Scanner Locked (Some models only, see the "Front panel and accessories comparisons" on page 3.) The scanner is not working because it is locked. Make sure the scanner is unlocked. Move the lock to the unlocked position. If the error message does not clear, unplug the scanner and plug it back in. Troubleshooting and maintaining 87 Resolving issues that did not generate messages If the scanner or software is not working but no message appears, look for the cause and solution in this section. Items you scanned previously are no longer on the computer. The scanned image might not have been saved as a file. If you send an image directly to a destination, the scanned image is not saved on the computer. When you use HP Precisionscan Pro to scan, use Save As to save the image to your computer. The scanner lamp stays on. The scanner lamp should time out and turn off automatically after a period of inactivity. l If you have recently used the scanner, wait a few more minutes. l If the scanner lamp is still on, you might have activated the Extend lamp time out feature. Check this setting on the Scanner tab in the Preferences of the HP Precisionscan Pro software. See "Setting preferences" on page 68. l Press the Power Save button on the front panel of the scanner to immediately turn off the scanner lamp and the XPA light source (if connected). See "General tab options" on page 37. If you still encounter problems with the scanner lamp or the Power Save button, contact HP Customer Support. (See "Contacting HP Customer Support" in the Setup and Support Guide.)