HP Scanjet 5500c HP Scanjet 4570c and 5500c scanner - (English) Glass Cleaning
HP Scanjet 5500c Manual
View all HP Scanjet 5500c manuals
Add to My Manuals
Save this manual to your list of manuals |
HP Scanjet 5500c manual content summary:
- HP Scanjet 5500c | HP Scanjet 4570c and 5500c scanner - (English) Glass Cleaning - Page 1
Glass cleaning hp scanjet 4570c/5500c scanner - HP Scanjet 5500c | HP Scanjet 4570c and 5500c scanner - (English) Glass Cleaning - Page 2
hp scanjet 4570c/5500c scanner Clean the underside of the scanner glass If cleaning the top surface of the scanner glass does not remove all dirt and smudges from the glass, you can also clean the underside of the glass. Cleaning the underside of the glass requires you to disassemble the scanner. - HP Scanjet 5500c | HP Scanjet 4570c and 5500c scanner - (English) Glass Cleaning - Page 3
needed: • phillips screwdriver Supplies needed: • Glass cleaner • lint-free cloths 1 Disconnect the USB cable between the scanner and computer. 2 Disconnect the power supply from the scanner. Wait at least 15 minutes (after disconnecting power) before dissembling the scanner and cleaning the glass - HP Scanjet 5500c | HP Scanjet 4570c and 5500c scanner - (English) Glass Cleaning - Page 4
and the plastic it could stain the calibration strip ( the white strip under the glass) and render your scanner useless. If the cleaner gets in the calibration strip area, the scanner must be sent to hp for repair. 5 Apply glass cleaner to a soft lint-free cloth. Clean the plastic first. 6 Apply the - HP Scanjet 5500c | HP Scanjet 4570c and 5500c scanner - (English) Glass Cleaning - Page 5
-fasten the top cover Begin disassembly only after completing steps 1 through 6 You are about to expose the interior of the scanner to the dust of the outside environment. the scanner is very sensitive to dust; any dust particles that get into the carriage head can cause streaks in the scanned image - HP Scanjet 5500c | HP Scanjet 4570c and 5500c scanner - (English) Glass Cleaning - Page 6
). Turn the top cover upside down and set it on a clean surface Dust will immediately begin accumulating in your scanner now that the top cover is off. Minimize the time the scanner base is exposed. Read all directions and have the necessary tools ready before removing the top cover. While the top - HP Scanjet 5500c | HP Scanjet 4570c and 5500c scanner - (English) Glass Cleaning - Page 7
it could stain the calibration strip ( the white strip under the glass) and render your scanner useless. If the cleaner gets in the calibration strip area, the scanner must be sent to hp for repair. 10 Apply glass cleaner sparingly to a soft, lint-free cloth and clean the glass. reassembly re - HP Scanjet 5500c | HP Scanjet 4570c and 5500c scanner - (English) Glass Cleaning - Page 8
12 Holding the top and bottom covers together, turn the scanner upside down on a clean surface. insert the screws 13 Re- Turn the unit over so that the glass side is facing up. insert the scanner lid you can now re-insert the scanner lid, with the lid in the open position. 15 Align the lid hinges - HP Scanjet 5500c | HP Scanjet 4570c and 5500c scanner - (English) Glass Cleaning - Page 9
16 Close the scanner lid. reconnect your scanner You can now reconnect the USB cable and the power supply to the scanner. For instructions on connecting the cables see the setup instructions that came with your scanner.
Glass cleaning hp scanjet 4570c/5500c scanner