HP Scanjet 5500c HP Scanjet 4570c and 5500c scanner - (English) Glass Cleaning - Page 6

Static discharge from your fingers, hand, or tools will damage the circuit, boards inside your

Page 6 highlights

remove the top cover After unscrewing the top cover, you are ready to remove it. top cover being removed 9 Carefully lift the top cover off the base. Lift the back of the top cover first then pull it out of the front bezel (bezel is referred to end containing the buttons and back is opposite of buttons). Turn the top cover upside down and set it on a clean surface Dust will immediately begin accumulating in your scanner now that the top cover is off. Minimize the time the scanner base is exposed. Read all directions and have the necessary tools ready before removing the top cover. While the top cover is off do not leave the scanner unattended. Static discharge from your fingers, hand, or tools will damage the circuit boards inside your scanner. Do not touch anything inside the scanner base.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9

remove the top cover
After unscrewing the top cover, you are ready to remove it.
top cover being removed
9
Carefully lift the top cover off the base. Lift the back of the top cover first then pull it
out of the front bezel (bezel is referred to end containing the buttons and back is opposite
of buttons). Turn the top cover upside down and set it on a clean surface
Dust will immediately begin accumulating in your scanner now that the top cover is off.
Minimize the time the scanner base is exposed. Read all directions and have the necessary tools ready
before removing the top cover. While the top cover is off do not leave the scanner unattended.
Static discharge from your fingers, hand, or tools will damage the circuit
boards inside your scanner. Do not touch anything inside the scanner base.